Climatic Testing Walk In Environmental Test Chamber With Large Capacity

• Ambient Humid:≤85%RH

• Ambient Pressure:86KPa～106KPa

• Installation space assurances, as following

• Prepare proper power supply and water supply

• No strong electromagnetic radiation source nearby

• The ground bearing capacity not less than 10000kg/m2

• Close to drainage system ( within 2 meters for condensate water)

• If need water or gas supply, should be equipped with in advance

• Work station ground should be flat, good ventilation; no flammable article, corrosive gas or dust

• Ambient Temp: 5℃~25℃suggested, 25℃~35℃ function well;(for air-cooled model);5℃～40℃ function

well (for water-cooled model)

• Water temperature: 5℃≤ water temp.s ≤28℃.If the source of water is air conditioning chilled water, it’s temp is lower than 10℃ ,need to take some measures preventing pipe condensing water.

• Water flow:≥ 10tons/hour

• Pipe diameter:G2.5 inch ×2

• Inlet water pressure:0.3MPa～0.6MPa

• Water pressure difference inlet and outlet:≥0.2MPa

• Water request:meet standard GB50050-1995

Note:

1, Test with no load, meeting GB/T5170-2008, if no other special notice.

2, Ambient Temp 25℃, good ventilation condition: function well if 35℃≥RT＞25℃;Cool down rate and thermal load capacity will be affected by ambient low temperature.

1,GB/T 2423.1 Low Temp. Test

2,GB/T 2423.2 High Temp. Test

3,GB/T2423.34 Climate Cycling Test

4,IEC60068-2 Climate Test

5,GJB 150.3 High Temp. Test

6,GJB 150.4 Low Temp. Test

7,GJB 150.9 Climate Test

8,MIL-STD-202G-103BHumidity Test