Contact Us

Contact Person : Jack He

Phone Number : +86-13842409825

WhatsApp : +8613842409825

Free call

500W H2S Gas Test Chamber Reliable For Simulation Experiment

Minimum Order Quantity : 1 Payment Terms : T/T, Western Union
Place of Origin: China Brand Name: Envsin
Certification: CE Model Number: EQF

Detail Information

Product Name: Gas Test Chamber Warranty: 1 Year
Power: Power Wind Speed: ≤1.7m/s
Gas Flowmeter: H2S,SO2,NO2,CI2 Temp. Range: 20℃~+45℃
High Light:

500W Gas Test Chamber

,

H2S Gas Test Chamber

,

H2S corrosion test chamber

Product Description

Custom design Corrosion Gas Test Chamber Simulation experiment

500W H2S Gas Test Chamber Reliable For Simulation Experiment 0

 

Main Technical Parameters (Product Model:EQF2330)
Temperature test Temperature range:20℃~+45℃ Remark:

1. Test in accordance with GB/T2423 and IEC60068
under empty chamber condition (except indicated).

2. The test data of the water-cooled
test chamber are under the conditions that the water
temperature is less than 28, the water pressure is between 0.3Mpa and 0.6Mpa, and the
water pressure difference between inlet and outlet is more than 0.2Mpa.
Temperature uniformity:≤2.0℃
Temperature deviation:≤±2.0℃
Temperature fluctuation:≤±0.5℃
Temperature rate:≥1℃/min
Temperature and humidity climatic test Humidity temperature control range:20℃~+50℃
Humidity range:50%RH~85%RH
Humidity uniformity:±5.0%RH
Humidity deviation: +2.0%~3%RH(>75%RH)±5%R.H(≤75%RH)
Humidity fluctuation:±5.0%RH
Gas concentration 5ppb~30ppm
The deviation of gas concentration in the chamber shall not exceed 10% of the set concentration,Concentration uniformity deviation of 10%
The empty chamber operation request meets the IEC60068-2-60 standard
Gas concentration measurement By calculating the volume ratio and then through the mass flowmeter measurement
On load capacity 500W,The temperature can be stable, the chamber body is not deformed
Noise Working noise ≤70dB (measured at 1 meter away from the test chamber)
Wind speed ≤1.7m/s
Gas flowmeter H2S,SO2,NO2,CI2
   
Standard  (IEC60068-2-1:2007) Test A: Low temperature test method
 
 (IEC60068-2-2:2007) Test B: High temperature test method
 
(IEC60068-2-78:2007) Test Cab: Constant humidity and heat test
 
(IEC60068-2-30:2005) Test Db: alternating humidity and heat test
 
GJB 150.3-1986 / GJB 150.3A-2009 High-temperature test
 
GJB 150.4-1986 / GJB 150.4A-2009 Low temperature test
 
GJB 150.9-1986 / GJB 150.9A-2009 Thermal-humidity test
 
IEC60068-2-60 Test Method KE: Man-made low concentration pollution gas corrosion test
 
GB/T2423.51-2000 Environmental testing of electrical and electronic products Test KE: Flow mixed gas corrosion test

 

500W H2S Gas Test Chamber Reliable For Simulation Experiment 1

You Might Be Into These
Get in touch with us

Enter Your Message

envsin62@envsin.com
+8613115503345
edddddie
13115503345