Walk-in Environmental Test Chamber with 10%~98% RH Humidity -40℃~180℃ Temperature

Structure:

• Test room is on the top, under which is cooling system; at the back is power distribution control; the front is the main control panel, and the extended one is on the right-back side. Door opens from right to left. At the back of test space are air circulation channel and air conditioning system.

​

Construction:

• Exterior material: Both sides static coated cold rolled steel
• Interior material: SUS304 Stainless steel
• Insulation material: Rigid polyurethane foam insulation layer​

​

Load-bearin:

• The bottom of inner chamber load capacity:≤50kg(averagely loaded)

• Shelves load capacity:≤20Kg(averagely loaded)

• Test space total load weight(shelves and bottom)≤80kg

​

• Single door with hinges on the left;

• Door size:800×950 mm(W×H)

• Silicon rubber equipped and heating system inside for anti-condensation

​

Observation window:

• Designed on the door, size:280×400mm(W×H), cavhollow with heating system

​

Cable ports to test spac:

• 2 ports with Φ50 mm on left and right sides, with screw caps and Soft silicone plugs

​

Lights:

• Lights by the observation window inside test space

​

Shelves:

• 2 shelves inside for samples; height adjustable

​

Drain holes:

• Condensate water Drain holes for condensate water outside

​

Overflow hole:

• Located at the back for condensate water outside

​

Wheels:

• Strong adjustable wheels

​

Separate design of water/electricit:

• Humid system and electric distribution system separated for safety(patent no.:ZL201220245236.8)

​