Model No.: ET71100S2
1. Temperature Testing Specifications
Low temperature impact temperature range:﹣70℃～﹣10℃
High temperature shock temperature range: +60℃～+150℃
Temperature fluctuation：±0.5℃
Temperature uniformity: ≤2℃
Temp Deviation (without load)：±2℃
Temp Gradient：＜2.0℃
Preheating zone temperature setting: +50℃～+200℃（Heating time：Room Temp→＋200℃≤40min）
Precooling zone temperature setting: ﹣80℃～+70℃（Cooling time：Room Temp→﹣80℃≤80min）
Recovery: ＜5min(Measured at the air outlet)
Temperature conversion time: ＜10sec
2. Chamber Volume
Test volume: 1050L
Basket size: 1000×1000×1050mm(W×D×H)
External size:4500mmx2100mmx2056mm(W×D×H)
3. Testing Standard
GB/T 2423.1-2001 / (IEC60068-2-1:2007) Test A: Low temperature test method;
GB/T 2423.2-2001 / (IEC60068-2-2:2007) Test B: High temperature test method;
GB/T2423.22 / IEC60068-2-14 test N: temperature change;
GJB 150.3-1986 / GJB 150.3A-2009 high temperature test;
GJB 150.4-1986 / GJB 150.4A-2009 low temperature test;
GJB 150.5-1986 / GJB 150.5A-2009 temperature shock test;
MIL STD 202F,method 107G BS 2011 DIN 40046,Test Na JESD22-A101-A;
Model No.: ET71100S2
1. Temperature Testing Specifications
Low temperature impact temperature range:﹣70℃～﹣10℃
High temperature shock temperature range: +60℃～+150℃
Temperature fluctuation：±0.5℃
Temperature uniformity: ≤2℃
Temp Deviation (without load)：±2℃
Temp Gradient：＜2.0℃
Preheating zone temperature setting: +50℃～+200℃（Heating time：Room Temp→＋200℃≤40min）
Precooling zone temperature setting: ﹣80℃～+70℃（Cooling time：Room Temp→﹣80℃≤80min）
Recovery: ＜5min(Measured at the air outlet)
Temperature conversion time: ＜10sec
2. Chamber Volume
Test volume: 1050L
Basket size: 1000×1000×1050mm(W×D×H)
External size:4500mmx2100mmx2056mm(W×D×H)
3. Testing Standard
GB/T 2423.1-2001 / (IEC60068-2-1:2007) Test A: Low temperature test method;
GB/T 2423.2-2001 / (IEC60068-2-2:2007) Test B: High temperature test method;
GB/T2423.22 / IEC60068-2-14 test N: temperature change;
GJB 150.3-1986 / GJB 150.3A-2009 high temperature test;
GJB 150.4-1986 / GJB 150.4A-2009 low temperature test;
GJB 150.5-1986 / GJB 150.5A-2009 temperature shock test;
MIL STD 202F,method 107G BS 2011 DIN 40046,Test Na JESD22-A101-A;
