Contact Us

Contact Person : Jack He

Phone Number : +86-13842409825

WhatsApp : +8613842409825

Free call

CE Approval SO2 H2S CO2 Laboratory Test Chamber For Noxious Gas

Minimum Order Quantity : 1 Payment Terms : T/T, Western Union
Place of Origin: China Brand Name: Envsin
Certification: CE Model Number: EQF

Detail Information

Humidity Range: 0%RH~85%RH Temp. Uniformity: ≤2.0℃
Humidity Uniformity: ±5.0%RH Humidity Fluctuation: ±5.0%RH
Certification: CE Warranty: 12 Months
High Light:

H2S laboratory test chamber


CE laboratory test chamber


SO2 gas sensor test chamber

Product Description

SO2 H2S CO2 HCL Corrosion Noxious Gas Test Chamber For Laboratory



Fashionable design of modular construction

7 colors touch screen display and 3 bit control system;interface Ethernet/USB

Special air circulation system inside ensures testing accuracy.(Patented)

Optional network video monitoring and data synchronization

Automatic reminder of equipment maintenance plans and software of recording malfunction

Optional remote-assist service function and teaching CDs

Optional APP mobility management


CE Approval SO2 H2S CO2 Laboratory Test Chamber For Noxious Gas 0

Technical Parameters

Temperature test Temperature range:20℃~+45℃ Remark:

1. Test in accordance with GB/T2423 and IEC60068 under empty chamber condition (except indicated).

2. The test data of the water-cooled
test chamber are under the conditions that the water temperature is less than 28, the water pressure is between 0.3Mpa and 0.6Mpa, and the water pressure difference between inlet and outlet is more than 0.2Mpa.
Temperature uniformity:≤2.0℃
Temperature deviation:≤±2.0℃
Temperature fluctuation:≤±0.5℃
Temperature rate:≥1℃/min
Temperature and humidity climatic test Humidity temperature control range:20℃~+50℃
Humidity range:50%RH~85%RH
Humidity uniformity:±5.0%RH
Humidity deviation: +2.0%~3%RH(>75%RH)±5%R.H(≤75%RH)
Humidity fluctuation:±5.0%RH
Gas concentration 5ppb~30ppm
The deviation of gas concentration in the chamber shall not exceed 10% of the set concentration,Concentration uniformity deviation of 10%
The empty chamber operation request meets the IEC60068-2-60 standard
Gas concentration measurement By calculating the volume ratio and then through the mass flowmeter measurement
On load capacity 500W,The temperature can be stable, the chamber body is not deformed
Noise Working noise ≤70dB (measured at 1 meter away from the test chamber)
Wind speed ≤1.7m/s
Gas flowmeter H2S,SO2,NO2,CI2
Standard GB/T 2423.1-2001 / (IEC60068-2-1:2007) Test A: Low temperature test method
GB/T 2423.2-2001 / (IEC60068-2-2:2007) Test B: High temperature test method
GB/T 2423.3-2006 / (IEC60068-2-78:2007) Test Cab: Constant humidity and heat test
GB/T 2423.4-2008 / (IEC60068-2-30:2005) Test Db: alternating humidity and heat test
GJB 150.3-1986 / GJB 150.3A-2009 High-temperature test
GJB 150.4-1986 / GJB 150.4A-2009 Low temperature test
GJB 150.9-1986 / GJB 150.9A-2009 Thermal-humidity test
IEC60068-2-60 Test Method KE: Man-made low concentration pollution gas corrosion test
GB/T2423.51-2000 Environmental testing of electrical and electronic products Test KE: Flow mixed gas corrosion test


CE Approval SO2 H2S CO2 Laboratory Test Chamber For Noxious Gas 1


You Might Be Into These
Get in touch with us

Enter Your Message