GJB Standard 3.3m3 Gas Test Chamber , Drive In Test Chamber Accelerated

Name: GJB Standard 3.3m3 Gas Test Chamber , Drive In Test Chamber Accelerated
Brand: Envsin
SKU: EQF2330
Price: 1.00 USD
Availability: InStock
Rating: 4.8 (138 reviews)

Minimum Order Quantity :	1	Price :	USD
Packaging Details :	Well packed in strong wooden case suitable for all types of long distance shipment	Delivery Time :	45 days
Payment Terms :	L/C, T/T, Western Union	Supply Ability :	35 per month

Place of Origin:	China	Brand Name:	Envsin
Certification:	CE	Model Number:	EQF2330

Detail Information
Product Name:	Drive-in Gas Test Chamber	The Test Volume:	3.3 M3
Outer Dimensions:	1200mm1200mm2300mm (W D H)	Exterior Dimensions:	1500mm2400MM2600mm (W D H)
Gas Flowmeter:	H2S,SO2,NO2,CI2	Gas Concentration:	5ppb~30ppm
Standard:	GB,GJB,IEC
High Light:	GJB Gas Test Chamber , 3.3m3 Gas Test Chamber , GJB drive in test chamber

Product Description

H2S,SO2,NO2,CI2 Drive-in Gas Test Chamber Accelerated Drive-in Test Chamber

Gas corrosion system:

Working principle Equipment design two sets of boxes, external temperature and humidity air conditioning cabinet + sample room. The air conditioning system has refrigeration system,heating system, humidification system, mixed gas inlet, exhaust gas discharge filter and other devices.

Before diluting corrosive gases are mixed, the air conditioning system creates the test temperature and humidity in the chamber outside the sample room. When the temperature and humidity are constant, the gas is input at the same time. The gas concentration is measured by calculating the volume ratio formula, and then the mass flowmeter is used for effective control, so that it reaches the specified range.In the test chamber, the gas is mixed evenly through the fan.

In the sample room, the air in the sample room is discharged through pumping, so that low pressure is formed in the sample room. Compared with the space outside the sample room in the test chamber, the wet air in the sample outdoor area is pumped into the sample room through the pipe. By recording the data, the flow rate of the air extracted from the sample chamber can be adjusted to obtain the specified number of gas volume changes per hour.

GJB Standard 3.3m3 Gas Test Chamber , Drive In Test Chamber Accelerated 0

Load Condition:

The total mass of the load placed per cubic meter of studio volume shall not exceed 80KG
The load physical volume is not greater than 2/5 of the studio volume
At any section perpendicular to the wind direction of the inner circulation, the total area of the sample load should not be greater than 1/3 of the cross-sectional area of the studio in this direction. Oversized sample load will affect the air balance and smooth of the chamber

Specification:

Drive-in Gas Test Chamber Technical Parameters (Product Model:EQF2330)
Temperature test	Temperature range:20℃~+45℃	Remark: 1. Test in accordance with GB/T2423 and IEC60068 under empty chamber condition (except indicated). 2. The test data of the water-cooled test chamber are under the conditions that the water temperature is less than 28, the water pressure is between 0.3Mpa and 0.6Mpa, and the water pressure difference between inlet and outlet is more than 0.2Mpa.
	Temperature uniformity:≤2.0℃
	Temperature deviation:≤±2.0℃
	Temperature fluctuation:≤±0.5℃
	Temperature rate:≥1℃/min
Temperature and humidity climatic test	Humidity temperature control range:20℃~+50℃ Humidity range:50%RH~85%RH
	Humidity uniformity:±5.0%RH
	Humidity deviation: +2.0%~3%RH(>75%RH)±5%R.H(≤75%RH)
	Humidity fluctuation:±5.0%RH
Gas concentration	5ppb~30ppm
	The deviation of gas concentration in the chamber shall not exceed 10% of the set concentration,Concentration uniformity deviation of 10%
	The empty chamber operation request meets the IEC60068-2-60 standard
Gas concentration measurement	By calculating the volume ratio and then through the mass flowmeter measurement
On load capacity	500W,The temperature can be stable, the chamber body is not deformed
Noise	Working noise ≤70dB (measured at 1 meter away from the test chamber)
Wind speed	≤1.7m/s
Gas flowmeter	H2S,SO2,NO2,CI2

Standard:

1. GB/T 2423.1-2001 / (IEC60068-2-1:2007)	Test A: Low temperature test method
2. GB/T 2423.2-2001 / (IEC60068-2-2:2007)	Test B: High temperature
3. GB/T 2423.3-2006 / (IEC60068-2-78:2007)	Test Cab: Constant humidity and heat test
4. GB/T 2423.4-2008 / (IEC60068-2-30:2005)	Test Db: alternating humidity and heat test
5. GJB 150.3-1986 / GJB 150.3A-2009	High-temperature test
6. GJB 150.4-1986 / GJB 150.4A-2009	Low temperature test
7. GJB 150.9-1986 / GJB 150.9A-2009	Thermal-humidity test
8. IEC60068-2-60	Test Method KE: Man-made low concentration pollution gas corrosion test
9. GB/T2423.51-2000	Environmental testing of electrical and electronic products Test KE: Flow mixed gas corrosion test

GJB Standard 3.3m3 Gas Test Chamber , Drive In Test Chamber Accelerated 1

Tag:

Climatic Test Chamber(37)

Gas Test Chamber(19)

High Altitude Test Chamber(20)

Solar Simulation Chamber(15)

Sand And Dust Test Chamber(22)

Temperature And Humidity Test Chamber(26)

Rain Spray Test Chamber(18)

Thermal Shock Test Chamber(18)

Walk In Environmental Test Chamber(16)

Accelerated Aging Test Chamber(14)

Salt Spray Test Chamber(11)

GJB Standard 3.3m3 Gas Test Chamber , Drive In Test Chamber Accelerated

GJB Gas Test Chamber

3.3m3 Gas Test Chamber

GJB drive in test chamber

H2S Gas Test Chamber

Envsin Gas Test Chamber

Envsin walk in environmental chamber

building a world-class enterprise in order to carry science and technology development, and unswerving contribute to the instrument testing industry